home *** CD-ROM | disk | FTP | other *** search
/ Columbia Kermit / kermit.zip / newsgroups / misc.19960715-19961006 / 000181_news@columbia.edu _Tue Aug 13 12:18:45 1996.msg < prev    next >
Internet Message Format  |  2020-01-01  |  3KB

  1. Return-Path: news@columbia.edu
  2. Received: from newsmaster.cc.columbia.edu (newsmaster.cc.columbia.edu [128.59.35.30]) by watsun.cc.columbia.edu (8.7.5/8.7.3) with ESMTP id MAA23548 for <kermit.misc@watsun.cc.columbia.edu>; Tue, 13 Aug 1996 12:18:44 -0400 (EDT)
  3. Received: (from news@localhost) by newsmaster.cc.columbia.edu (8.7.5/8.7.3) id MAA05041 for kermit.misc@watsun; Tue, 13 Aug 1996 12:18:43 -0400 (EDT)
  4. Path: news.columbia.edu!sol.ctr.columbia.edu!news.uoregon.edu!newsfeed.orst.edu!newshub.tc.umn.edu!skypoint.com!not-for-mail
  5. From: escargo@skypoint.com (David S Cargo)
  6. Newsgroups: comp.protocols.kermit.misc
  7. Subject: Kermit over TCP/IP Ethernet
  8. Date: 13 Aug 1996 10:26:54 -0500
  9. Organization: SkyPoint Communications Inc.
  10. Lines: 37
  11. Message-ID: <4uq6ru$fhf@mirage.skypoint.com>
  12. NNTP-Posting-Host: mirage.skypoint.net
  13.  
  14. I'm having some problems with Kermit over a TCP/IP network.  First,
  15. a description of my network.
  16.  
  17. I have a pc-compatible, a 386DX/25 with 8Mb, running MS-DOS 6.22.
  18. I have a 3COM 3C509 ethernet card running the 3C509.COM packet driver.
  19. The ethernet is also connected to a router that is running transparent
  20. bridging over an ISDN line connected to another router running
  21. transparent bridging.  So, to my PC it appears I'm connected to a LAN
  22. that uses TCP/IP.
  23.  
  24. Now, I'm using MS-DOS Kermit 3.14, patchlevel 9.  I can start the
  25. 3C509 packet driver, start Kermit, and telnet to hosts on my LAN
  26. or even telnet to other hosts on the internet through our LANs
  27. gateway.  I can transfer files this way, at data rates about twice
  28. as fast as through a 28.8K modem.
  29.  
  30. The problem comes when, after no circumstance I can pinpoint, network
  31. communication stops.  When I connect to the console port of my router,
  32. I can ping other addresses on the LAN.  I get no response when I try
  33. to ping the PC.  If I exit Kermit and start it again, I still can't
  34. connect to the network.  If I restart my PC, I can reconnect to the
  35. network.  This leads me to suspect either the 3C509 packet driver,
  36. or Kermit's interface to it.
  37.  
  38. Has anybody else seen this problem?
  39.  
  40. I haven't seen anything that would let me examine the 3C509 driver's
  41. forwarding table (which would relate IP addresses to MAC addresses).
  42. I haven't seen anything that would imply that Kermit can ping (though
  43. I wish it could).  I haven't seen anything that would imply that Kermit
  44. can interrogate the 3C509 driver to see what state it's really in.
  45.  
  46. As it stands, my interface to the ethernet is too unreliable; I'm going
  47. to have to find another piece of interface software and TCP/IP stack.
  48.  
  49. David S. Cargo
  50.